Xerox 6250N Service Manual - Page 158
[Y] [M] [C] [K] Toner Cartridge Failure
![]() |
UPC - 095205770407
View all Xerox 6250N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Troubleshooting Procedure Table Step 4 5 Actions and Questions Does the error recur after the CRUM Reader board PL 10.1.21 has been replaced? Check continuity of the harness RFID2 (J341 - J3411) Does the harness show continuity? 6 Check continuity of the harness RFID (J34 - J3411) Does the harness show continuity? Yes Go to Step 5. No Complete Go to Step 6. Replace the CRUM harness RFID2 PL 10.1.19. Replace the Replace the Engine Control harness assembly Board, page 8-107. RFID PL 13.1.13. [Y] [M] [C] [K] Toner Cartridge Failure Code 86, 87, 88, 89: A CRUM error occurred in the yellow, magenta, cyan, or black toner cartridge. Troubleshooting Reference Table Applicable Parts Genuine Xerox toner cartridge (consumable) PL 10.1.7~10 Wiring and Plug/Jack Map References "Developer Section 1" on page 10-19 Troubleshooting Procedure Table Step 1 2 3 4 5 Actions and Questions Yes Remove top cover and ensure that cartridge is locked in position. Does the error clear after locking the cartridge? Complete Does the error recur after the pertinent toner cartridge has been replaced? Go to Step 3. Check connection of the CRUM reader Go to Step 4. board to CRUM harness connector J341. Is the harness properly connected? Replace the CRUM reader board PL 10.1..21. Does the error recur after the CRUM reader board has been replaced? Go to Step 5. Check J341 J3411 of CRUM harness Go to Step 6. RFID2 for continuity No Go to Step 2. Complete Reconnect CRUM reader board to the harness . Complete Replace CRUM harness RFID2 PL 10.1.19. Error Messages and Codes 3-77
![](/manual_guide/products/xerox-6250n-service-manual-180e350/158.png)