Xerox 6250N Service Manual - Page 139

Wrong Paper Size; Load Tray 2 with [size] [type] ■ Remove Tray 2 and inspect the tray cavity of the printer to ensure that it is free of obstructions or debris. ■ Ensure that the tray is loaded with supported media. ■ Ensure that the media guides are properly adjusted. ■ Reinstall the tray. ■ Cycle printer power. ■ If the problem persists, follow the procedure below. Note This is a media SIZE mismatch error. Troubleshooting Reference Table Applicable Parts Wiring and Plug/Jack Map References Paper Size Switch Assembly, PL 3.2.4 "Paper Tray 2" on page 10-17 Troubleshooting Procedure Table Steps Actions and Questions 1 Check the following for evidence of fault or damage: Paper Size Switch Tray [2], PL 3.2.4 Actuators on the right side of Tray [2] 2 Use service diagnostics to test the Tray [2] Paper Size Switches. Use the table below for reference. Do the switches function correctly? 3 Does the printer function correctly after replacing the Engine Control Board? 4 Verify the pertinent voltages on pins P/J47 - 1 P/J47 - 3 P/J47 - 2 P/J47 - 3 P/J47 - 4 P/J47 - 3 Correspond to the paper size switch position chart below. Yes No Replace the parts Go to Step 2. concerned. Replace Engine Control Board, page 8-107. Go to Step 4. Complete Go to Step 4. Go to Step 5. Replace the Paper Size Switch page 8-26. 3-58 Phaser 6250 Color Laser Printer Service Manual