Xerox 6250N Service Manual - Page 36

Functional Specifications (Continued) Characteristic Specification First Print-Out (in seconds) (Letter/A4) (printer in Ready state) Mode Simplex, 600 dpi Duplex, 600 dpi Simplex, half-speed Duplex, half-speed Tray 1 14.5 23 23.5 38.5 Tray 2 15 23.5 24.5 39.5 Tray 3 16.5 25 27.5 42.5 Tray 4 18 26.5 30.5 45.5 Warm-up time 30 seconds from cold start (power off condition) Electrical Specifications Characteristic Primary line voltages Primary line voltage frequency range Power consumption at rated voltage input Specification 110-127 V Printer - (90 - 140 V) 13 amp circuit 220-240 V Printer - (198 - 264 V) 7-8 amp circuit 100-120 V Printer - 50/60 Hz + 3Hz 220-240 V Printer - 50/60 Hz + 3Hz Mode Print Mode Ready Mode Sleep Mode Condition Max.. Fuser On Fuser Off 100/120 VAC 1000 W or less 180 W or less 45 W or less 220/240 VAC 1000 W or less 180 W or less 45 W or less Environmental Specifications Characteristic Temperature: Operating Transportation Storage 24 month maximum 1 month maximum Humidity Operating Transportation Storage Altitude Operating Transportation Acoustic Noise Idle Printing Specification Optimal print-quality range: 17o to 26o C (62o to 80o F) 10o C to 32o C (50o F to 90o F) -30o C to +50o C (-22o F to 122o F) Normal: 0o C to 35o C (32o F to 95o F) Severe: -20o C to 40o C (-4o F to 104o F) Optimal print-quality range: 35% to 70% 10% - 85% 30% - 85% 5% - 95% 0 - 2,500 meters (8,000 ft.) 0 - 6,092 meters (20,000 ft.) Printer Only 35.0db or less 55.0db or less (Full Speed) 52.0db or less (Half Speed) With Feeder Option 35.0db or less 55.0db or less (Full Speed) 53.0db or less (Half Speed) General Information 1-13