Xerox 6250N Service Manual - Page 223

Removing Routine Maintenance Items and Consumables Routine Maintenance Items include the Transfer Roller, Imaging Unit, and Fuser Assembly. The Paper Feed Rollers are also Routine Maintenance Items, but individual procedures for their removal and replacement are provided on page 8-18 and page 8-36. Consumables consist of the four toner cartridges. Transfer Roller Removal Warning If the printer has been in operation recently the Fuser may be hot. Be careful when you release the latches on the Transfer Roller not to come into contact with the hot Fuser. 1. Power down the printer. 2. Open Door A. 3. Squeeze the latch at each end of the Transfer Roller and pivot the latch up. 4. Lift the Transfer Roller out of the printer. Imaging Unit Removal 1. Power down the printer. 2. Open Door A. 3. Open Door C. 4. Grasp the handle on the top of the Imaging Unit and lift it out of the printer. 5. Place the Imaging Unit in a light proof bag or other light proof container. Caution Leaving the Imaging Unit exposed to light for periods in excess of a few minutes can quickly degrade its performance and result in early failure. Fuser Removal Warning The Fuser may be hot. Turn off power and allow at least 5 minutes for the Fuser to cool before removal. 1. Power down the printer. 8-4 Phaser 6250 Color Laser Printer Service Manual