Xerox 6250N Service Manual - Page 179
created a new document, select Print from the File menu . Click on the Printer
UPC - 095205770407
View all Xerox 6250N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
e. In the Terminal tool, try using Traceroute to determine if you are on the same subnet as your printer. For example: traceroute 13.62.70.112 should produce exactly one hop before completing the trace. Correct as needed, and retry your print job. f. If you still cannot connect to the printer via network, try another computer. 4. In MAC OSX, open Print Center. Check to make sure the printer status does not indicate "Stopped". If it does, check your network and insure the host system is on the same subnet as the printer. Correct if needed. Delete all jobs in the queue for the printer by double-clicking the printer name, selecting each job, and clicking Delete. Restart the print queue by clicking Start Jobs. Try your print job again. 5. In the Print Center, select your printer. In the Printers menu, select Show Info. From the pull down menu in Printer Info, make sure the model number shown for the printer is correct. If the model number is wrong, click the model pull down, and re-install. Check the Installable Options and make sure they match the printer' configuration. If any changes are made, retry your print job. 6. If there is still no output, try printing from a simple application. Open TextEdit, select New File, and create a small test document. Select Print from the File menu. 7. If an error message displays or there is no output, try turning on the PostScript error status from CentreWare IS or the printer front panel. PostScript will now output an error page if an error occured during the print job, assuming the printer received it. 8. Try printing again using the TextEdit tool. Once you have opened a document or created a new document, select Print from the File menu . Click on the Printer pull down and select Edit Printer List. Click the add button, or pick Add Printer from the Printers menu (The add button is configurable, so it may not be there). Select IP Printing from the pulldown menu. Put the IP address your printer in the Printer's Address text area. Click on the Printer Model pulldown, and select XEROX. A scrolling list should appear. Pick the correct Xerox Phaser 6250 model. You can check the exact model from the startup page upper right corner. The new added printer will be shown in bold on the printer list, indicating it is the default printer. When you are done adding thenew printer, close the printer list dialog. Now select your printer from the Printer pulldown and click Print in the dialog box. 9. If you can print from the TextEdit tool, but cannot print from your application, the problem is likely in your application. Check for upgrade availability or contact the application vendor for further diagnosis. 4-18 Phaser 6250 Color Laser Printer Service Manual