Xerox 6250N Service Manual - Page 90

Service Diagnostic Tests Test Front Panel Display and Test Definition Print Service Menu Map - Prints the service diagnostics menu map and exits service diagnostics. General Status - Provides the following print engine status: Status NOTE This is current status since entering diagnostics only. It is not a Fault Log. If Ready is reached, the register is cleared. No Status to Report = the printer is online and ready to print. Displays an engine status that will prevent printing. Status is displayed sequentially, one line at a time. Engine Board ROM Version Engine FW: #.#.# Displays the engine firmware version installed. Printer Configuration Memory: ###MB Hard Drive: Not Installed or Installed HCF: Installed Not Installed Displays current memory installed. Detects presence of Hard Drive option. Detects presence of High-Capacity Feeder option. Ambient Temperature/ Humidity Temperature: XX oC Humidity: ## % Displays the current Temperature and Humidity for the printer. Fuser Temperature Temperature: XX oC Displays the printers current Fuser temperature. Fault History Device Status Jams Hardware Errors Firmware Errors Fan Motors CTD (ADC) Sensor Errors Fuser Failure Laser Failure Life Over Trays Miscellaneous CRUMS Displays Fault occurrence since last power cycle. Test Prints - Prints test prints stored in the Engine Control Board. The prints are used by service personnel to identify, repair and validate the operability of the printer. Error Messages and Codes 3-9