Xerox 6250N Service Manual - Page 35

Functional Specifications Functional Specifications Characteristic Specification Printing process Color medium Resolution / Addressability Operating Modes Continuuous Operating Printing Speed ppm = pages per minute ipm = inches per minute Imaging System - 4-tandem drums, electro-photographic system using intermediate drum transfer rolls (IDTs). Exposure System - Semiconductor laser, simultaneous scanning by 4 beams. Development System - Dry type 2-component developer. Fusing System - Heat fusing, free nip-belt system. Yellow, Magenta, Cyan, and Black Toner Cartridges Draft 600 x 600 dpi Enhanced 2400 x 600 dpi (Default) Photo 2400 x 600 dpi* * Not available on the Phaser 6250B. Print Mode: Print Engine capable of making prints immediately. Ready Mode: 20 seconds from completion of a print. Sleep/ Low Power/ Power Saver Mode: Entered after a specified period of Print Engine inactivity since completion of the last print. Mode 600/2400 dpi Paper Size / wt g/m2 Simplex Letter / A4 65 -130 26/24 ppm 100-163 13/12 ppm 160-216 13/12 ppm Duplex 15 ipm 7.8 ipm N/A 600/2400 dpi Legal 65 -130 100-163 160-216 19 ppm 10 ppm 10 ppm 16 ipm 7.8 ipm N/A 600/2400 dpi Envelope/Postcard 160-216 13 ppm N/A Cleaning Cycle interval for continuous printing 600/2400 dpi Letter / A4 / OHP Letter / A4 Photo Glossy Paper 100-200 8.6/8 ppm 8.6/8 ppm 5 ipm Print speed will be reduced if the print job is larger than the cleaning cycle interval. IU Print Volume Draft Enhanced Photo Pages Pages Pages 0 - 5 K Pages 53 31 22 5 - 10 K Pages 35 26 18 10 - 15 K Pages 35 26 18 15 - 20 K Pages 35 26 18 20 - 25 K Pages 29 22 13 25 - 30 K Pages 29 22 13 >30 K Pages 29 22 13 1-12 Phaser 6250 Color Laser Printer Service Manual