Xerox PE220 User Guide - Page 195

10 Specifications Be sure the seam extends all the way to the corner of the envelope as illustrated below. Correct Incorrect Envelopes with Adhesive Strips or Flaps Envelopes with a peel-off adhesive strip or with more than one flap that folds over to seal must use adhesives compatible with the heat and pressure in the machine. The extra flaps and strips might cause wrinkling, creasing or even jams and may even damage the fuser. Envelope Margins The following gives typical address margins for a commercial #10 or DL envelope. Type of Address Minimum Maximum Return address 0.6 in. (15 mm) 2 in. (51 mm) Delivery address 2 in. (51 mm) 3.5 in. (90 mm) NOTE: • For the best print quality, position margins no closer than 0.6 in. (15 mm) from the edges of the envelope. • Avoid printing over the area where the envelope's seams meet. Envelope Storage Proper storage of envelopes helps contribute to print quality. Envelopes should be stored flat. If air is trapped in an envelope, creating an air bubble, then the envelope may wrinkle during printing. Labels CAUTION: - To avoid damaging the machine, use only labels recommended for laser printers. Xerox PE220 10-11