Xerox PE220 User Guide - Page 196
Transparencies, recommended for use in laser printers.
UPC - 095205221152
View all Xerox PE220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 196 highlights
10 Specifications - To prevent serious jams, always load one sheet of paper at a time to print labels. - Never print on the same sheet of labels more than once and never print on a partial sheet of labels. When selecting labels, consider the quality of each component: • Adhesives: The adhesive material should be stable at 180°C (356°F), the machine's fusing temperature. • Arrangement: Only use labels with no exposed backing between them. Labels can peel off sheets with spaces between the labels, causing serious jams. • Curl: Prior to printing, labels must lie flat with no more than 5 in. (13 mm) of curl in any direction. • Condition: Do not use labels with wrinkles, bubbles or other indications of separation. Transparencies Transparencies used in the machine must be able to withstand 180°C (356°F), the machine's fusing temperature.+ NOTE: Load only 1 transparency at a time. CAUTION: To avoid damaging the machine, use only transparencies recommended for use in laser printers. 10-12 Xerox PE220