Yamaha RX-A1010 Owners Manual - Page 114
Monitor Out Assign, Party Mode Set, Zone Scene Rename, Setup procedure
View all Yamaha RX-A1010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
❑ Mono Switches between stereo and monaural for Zone2 or Zone3 output. Settings Off (default) On Produces stereo sounds in Zone2 or Zone3. Produces monaural sounds in Zone2 or Zone3. ■ Monitor Out Assign Select the zone for which the MONITOR OUT/ZONE OUT (COMPONENT VIDEO, S VIDEO and VIDEO) jacks are used. Settings Main (default), Zone2, Zone3 ■ Zone Scene Rename Changes the scene names (for Zone2 or Zone3) displayed on the front display or TV screen. ■ Setup procedure 1 Use the cursor keys to select a zone and press ENTER. 2 Use the cursor keys to select a scene to be renamed and press ENTER. 3 Press ENTER, use the cursor keys to rename, and then press ENTER again. • The video conversion between the analog video jacks does not work for multi-zone video output. To watch videos played back on a video device on the zone video monitor, you need to connect the video monitor to this unit in the same way as the video device. ■ Party Mode Set Enables/disables switching to the party mode (p.85) for each zone. Choice Target: Zone2, Target: Zone3 Settings Disable Disables switching to the party mode. Enable (default) Enables switching to the party mode. You can turn on/off the party mode by pressing PARTY on the remote control. 4 Use the cursor keys to select "OK" and press ENTER. • To clear the entry, select "CLEAR". 5 To exit from the menu, press ON SCREEN. En 114