Yamaha RX-A1010 Owners Manual - Page 133
APPENDIX, Frequently asked questions, I want to turn off the onscreen messages displayed during
View all Yamaha RX-A1010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
APPENDIX Frequently asked questions The new speaker system does not provide an ideal sound balance... If you have changed speakers or speaker system, use "Auto Setup" to optimize the speaker settings again (p.45). If you want to adjust the speaker settings manually, use "Manual Setup" in the "Setup" menu (p.104). Since we have small children, we want to set limitations on the volume control... If a small child, etc. accidentally operates the controls on the main unit or remote control, the volume may suddenly increase. And this may cause injury or damage this unit or speakers. We recommend using "Max Volume" in the "Setup" menu to set the maximum volume level for this unit in advance (p.108). You can also set the maximum volume for Zone2 or Zone3 (p.113). I am occasionally startled by a sudden large sound when turning on this unit... By default, the volume level when this unit last entered standby mode is automatically applied. If you want to fix the volume, use "Initial Volume" to set the volume to be applied when this receiver is turned on (p.108). You can also set the initial volume for Zone2 or Zone3 (p.113). I made HDMI connections but HDMI Control does not work at all... To use HDMI Control, you need to perform the HDMI Control link setup (p.144). After connecting HDMI Control-compatible devices (TV, BD/DVD players, etc.) to this unit, enable HDMI Control on each device and perform the HDMI Control link setup. This setup is required every time when you add a new HDMI Control-compatible device to your system. For information on how HDMI Control works between your TV and playback devices, refer to the instruction manuals of each device. I want to turn off the onscreen messages displayed during operations... By default, short messages are displayed on the TV screen when this unit is operated (input selection, volume adjustment, etc). In case that the short messages bother you when you are watching movies or sports, configure "Short Message" (p.116) in the "Setup" menu to turn off the short messages. I want to prevent accidental changes to the settings... You can protect the settings configured on this unit (speaker settings, etc.) by utilizing "Memory Guard" in the "Setup" menu (p.117). The web control screen (p.87) becomes inaccessible... If you are using a DHCP server, the IP address of this unit may change each time this unit is turned on. Check the IP address of this unit in "Network" (p.119) in the "Information" menu. Also, if you have enabled "MAC Address Filter" (p.113), you need to specify the MAC address of your PC in "Address Setup" (p.113) to allow the PC to access this unit. For information on how to check the MAC address of your PC, refer to the instruction manuals of it. The supplied remote control concurrently controls this unit and another Yamaha product that is not intended... When using multiple Yamaha products, the supplied remote control may work on another Yamaha product or another remote control may work on this unit. In this case, set each remote control with a unique remote control ID for its corresponding receiver (p.120). En 133