Yamaha RX-A1010 Owners Manual - Page 26

1 Speaker connections 2 3 4 5 6 7 8 9 ■ Connecting front speakers that support bi-amp connections When using front speakers that support bi-amp connections, connect them to the FRONT jacks and EXTRA SP1 jacks. To enable the bi-amp function, configure the "Power Amp Assign" setting (p.104) in the "Setup" menu after connecting the power cable to an AC wall outlet. This unit (rear) R SURROUND L R SURROUND BACK L SPEAKERS ZONE 2/ZONE 3/R.PRESENCE R EXTRA SP2 L CENTER R FRONT L ZONE 2/ZONE 3/F.PRESENCE/ BI-AMP R EXTRA SP1 L ■ Connecting Zone2/3 speakers When using Zone2/3 speakers, connect them to the EXTRA SP1~2 jacks. To utilize the EXTRA SP1~2 jacks for Zone2/3 speakers, configure the "Power Amp Assign" setting (p.104) in the "Setup" menu after connecting the power cable to an AC wall outlet. This unit (rear) R SURROUND L R SURROUND BACK L SPEAKERS ZONE 2/ZONE 3/R.PRESENCE R EXTRA SP2 L CENTER R FRONT L ZONE 2/ZONE 3/F.PRESENCE/ BI-AMP R EXTRA SP1 L SINGLE SPEAKER IMPEDANCE SINGLE SPEAKER IMPEDANCE Caution • Before making bi-amp connections, remove any brackets or cables that connect a woofer with a tweeter. Refer to the instruction manual of the speakers for details. When not making bi-amp connections, make sure that the brackets or cables are connected before connecting the speaker cables. Zone2 Zone3 Main zone • You can select a zone (Zone2 or Zone3) to be assigned to the EXTRA SP1~2 jacks in "Power Amp Assign" (p.104) in the "Setup" menu. By default, Zone2 is assigned to the EXTRA SP1 jacks and Zone3 is assigned to the EXTRA SP2 jacks. • You can also connect Zone2 and Zone3 speakers using an external amplifier (p.81). En 26