Yamaha RX-A1010 Owners Manual - Page 28

Input/output jacks and cables ■ Video/audio jacks ❑ HDMI jacks Transmit digital video and digital sound through a single jack. Use an HDMI cable. AV 1 HDMI cable • Use a 19-pin HDMI cable with the HDMI logo. We recommend using a cable less than 5.0 m long to prevent signal quality degradation. • To connect a device that has a DVI jack, an HDMI/DVI-D cable is required. • The HDMI jacks of this unit support the HDMI Control, Audio Return Channel (ARC), and 3D video transmission (through output) features. ■ Video jacks ❑ COMPONENT VIDEO jacks Transmit video signals separated into three components: luminance (Y), chrominance blue (PB), and chrominance red (PR). Use a component video cable with three plugs. COMPONEN Component video cable AV 1 A ❑ S VIDEO jack Transmits S-video signals that include luminance (Y) and chrominance (C) components. Use an S-video cable. S-video cable ❑ VIDEO jacks Transmit analog video signals. Use a video pin cable. AV 1 Video pin cable ■ Audio jacks ❑ OPTICAL jacks Transmit digital audio signals. Use a digital optical cable. Remove the tip protector (if available) before using the cable. Digital Optical cable ❑ COAXIAL jacks Transmit digital audio signals. Use a digital coaxial cable. Digital coaxial cable ❑ AUDIO jacks Transmit analog stereo audio signals. Use a stereo pin cable. Stereo pin cable En 28