Yamaha RX-A1010 Owners Manual - Page 51
Warning messages, Cause, Remedy, W-1: Out of Phase, W-2: Over Distance, W-3: Level Error - specifications
View all Yamaha RX-A1010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
1 2 3 4 5 6 7 8 9 Automatic speaker setup Warning messages Even if any warning message is displayed after the measurement, you can save the measurement results by following on-screen instructions. However, we recommend you perform YPAO again to use this unit with the optimal speaker settings. Warning message W-1: Out of Phase W-2: Over Distance W-3: Level Error Cause Any of the speaker cables may be connected with the reversed polarity (+/-). Any of the speakers is placed more than 24 m from the listening position. There are a significant volume differences between the speakers. Remedy Select "Wiring" in "Result" (p.49) and check the cable connections (+/-) of the speaker indicated with "Reverse". If the speaker is connected incorrectly, turn off this unit and then reconnect the speaker cable. Depending on the type of speakers or room environment, this message may appear even if the speakers are connected correctly. Select "Distance" in "Result" (p.49) and move the speaker indicated with ">24.0m (>80.0ft)" within 24 m of the listening position. Check the use environment and cable connections (+/-) of each speaker, and the volume of the subwoofer. We recommend using the same speakers or speakers with as similar specifications as possible. En 51