Yamaha RX-A1010 Owners Manual - Page 149

❑ Compatible Decoding Formats • Decoding Format - Dolby TrueHD, Dolby Digital Plus - DTS-HD Master Audio, DTS-HD High Resolution, DTS Express - Dolby Digital, Dolby Digital EX - DTS, DTS 96/24, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1 • Post Decoding Format - Dolby Pro Logic - Dolby Pro Logic II Music, Dolby Pro Logic II Movie, Dolby Pro Logic II Game - Dolby Pro Logic IIx Music, Dolby Pro Logic IIx Movie, Dolby Pro Logic IIx Game - DTS Neo:6 Music, DTS Neo:6 Cinema ❑ Audio Section • Rated Output Power (20 Hz to 20 kHz, 0.06% THD, 8Ω) Front L/R 140 W+140 W Center 140 W Surround L/R 140 W+140 W Surround Back L/R 140 W+140 W Front Presence L/R 140 W+140 W (1 kHz, 0.9% THD, 8Ω) Front L/R 175 W/ch (155 W+155 W) Center 175 W/ch (155 W) Surround L/R 175 W/ch (155 W+155 W) Surround Back L/R 175 W/ch (155 W+155 W) Front Presence L/R 175 W/ch (155 W+155 W) (1 kHz, 0.9% THD, 4Ω) [U.K. and Europe models] Front L/R 220 W/ch • Maximum Effective Output Power (JEITA, 1 kHz, 10% THD, 8 Ω) [China, Korea, Asia and General models] Front L/R 220 W/ch Center 220 W/ch Surround L/R 220 W/ch Surround Back L/R 220 W/ch Front Presence L/R 220 W/ch • Dynamic Power (IHF) Front L/R (8/6/4/2 165/210/285/405 W • Damping Factor Front L/R, 1 kHz, 8 150 or more • Input Sensitivity / Input Impedance PHONO (1 kHz, 100 W/8 3.5 mV/47 kΩ AUDIO2 etc. (1 kHz, 100 W/8 200 mV/47 kΩ • Maximum Input Signal PHONO (1 kHz, 0.5% THD 60 mV or more AUDIO2 etc. (1 kHz, 0.5% THD 2.4 V or more • Output Level / Output Impedance AV OUT 200 mV/1.2 kΩ HEADPHONE OUT 150 mV/100 Ω PRE OUT SUBWOOFER (50 Hz 1.0 V/1.2 kΩ Except SUBWOOFER (1 kHz 1.0 V/1.2 kΩ ZONE OUT 1.0 V/1.2 kΩ • Frequency Response AUDIO2 etc. to Front (Pure Direct, 10 kHz to 100 kHz 0/-3 dB • RIAA Equalization Deviation PHONO (20 Hz to 20 kHz 0±0.5 dB • Total Harmonic Distortion PHONO to AV OUT 0.02% or less MULTI CH INPUT to SP OUT (Pure Direct, 70W, 8 0.04% or less • Signal to Noise Ratio (IHF-A Network) PHONO to AV OUT (Input shorted 5 mV) [U.S.A., Canada, China and General models]... 86 dB or more [Other models 81 dB or more AUDIO2 etc. to SP OUT (Pure Direct, Input shorted 250 mV 100 dB or more • Residual Noise (IHF-A Network) Front L/R (SP OUT 150 µV or less • Channel Separation PHONO (Input Shorted, 1 kHz/10 kHz)... 60 dB/55 dB or more AUDIO2 etc. (Input 5.1 kΩ Shorted, 1 kHz/10 kHz) ..... 60 dB/45 dB or more • Volume Control Main Zone MUTE, -80 dB to +16.5dB (0.5 dB step) Zone2, Zone3 MUTE, -80 dB to +16.5dB (0.5 dB step) • Tone Control Characteristics (Front L/R) Main Zone Bass Boost/Cut 6.0 dB/50 Hz (0.5 dB step) Bass Turnover 350 Hz Treble Boost/Cut 6.0 dB/20 kHz (0.5 dB step) Treble Turnover 3.5 kHz Zone2, Zone3 Bass Boost/Cut 10 dB/50 Hz (2 dB step) Bass Turnover 350 Hz Treble Boost/Cut 10 dB/50 Hz (2 dB step) Treble Turnover 3.5 kHz • Filter Characteristics (fc=40/60/80/90/100/110/120/160/200 Hz) H.P.F. (Front, Center, Surround, Surround Back: Small 12 dB/oct. L.P.F. (Subwoofer 24 dB/oct. ❑ Video Section • Video Signal Type [U.S.A., Canada, Korea and General models NTSC [Other models PAL • Video Signal Type (Video Conversion NTSC/PAL • Video Signal Level Composite 1 Vp-p/75 Ω S-Video Y 1 Vp-p/75 Ω C (NTSC) [U.S.A., Canada, Korea and General models 0.286 Vp-p/75 Ω C (PAL) [Other models 0.3 Vp-p/75 Ω Component Y 1 Vp-p/75 Ω Pb/Pr 0.7 Vp-p/75 Ω • Video Maximum Input Level (Video Conversion Off 1.5 Vp-p or more • Signal to Noise Ratio (Video Conversion Off) .... 60 dB or more • Monitor Out Frequency Response (Video Conversion Off) Component (MONITOR OUT/ZONE OUT 5 Hz to 100 MHz, ±3 dB En 149