Yamaha RX-A1010 Owners Manual - Page 48
Measuring at multiple listening positions (multi measure)
View all Yamaha RX-A1010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
1 2 3 4 5 6 7 8 9 Automatic speaker setup SOURCE RECEIVER AV 1 2 3 5 6 7 AUDIO 1 2 3 PHONO MULTI DOCK TUNER USB [A] SCENE 1 2 3 4 V-AUX 4 NET [B] 4 PROGRAM MUTE VOLUME TOP MENU ON SCREEN POP-UP/MENU OPTION ENTER RETURN DISPLAY Cursor keys ENTER RETURN MODE PRESET INPUT MUTE CLASSICAL MOVIE TV TV VOL LIVE CLUB STEREO TV CH ENTERTAIN STRAIGHT PURE DIRECT Measuring at multiple listening positions (multi measure) When "Multi Position" is set to "Yes", follow the procedure below to make the measurement. • YPAO measurement is not performed correctly when any obstacles are in the room. • During the measuring process, keep stuff in the corners or remove it from the room. It takes about 10 minutes to make the measurement at 8 listening positions. • If any error message (such as E-1) or warning message (such as W-1) appears, see "Error messages" (p.50) or "Warning messages" (p.51). 1 To start the measurement, use the cursor keys to select "Measure" and press ENTER. The measurement will start in 10 seconds. Press ENTER again to start the measurement immediately. • To cancel the measurement, press RETURN. The following screen appears on the TV when the measurement at the first position finishes. 3 If the measurement at all listening position are made, use the cursor keys to select "CANCEL" and press ENTER. If you have made the measurement at 8 listening positions, the following screen appears automatically. • To check the measurement results, select "Result". For details, see "Checking the measurement results" (p.49). 4 Use the cursor keys to select "Save/Cancel" and press ENTER. 5 To save the measurement result, use the cursor keys to select "SAVE" and press ENTER. 2 Move the YPAO microphone to the next listening position and press ENTER. Repeat step 2 until the measurement at all listening positions (up to 8) are made. The corrected speaker settings are applied. • To finish the measurement without saving the result, select "CANCEL". 6 Disconnect the YPAO microphone from this unit. Now optimization of the speaker settings is complete. En 48