Yamaha RX-A1010 Owners Manual - Page 91
Tone Control Tone Control, Adaptive DRC Adaptive DRC, CINEMA DSP 3D Mode CINEMA DSP 3D
View all Yamaha RX-A1010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
■ Tone Control (Tone Control) Adjusts the high-frequency range (Treble) and low-frequency range (Bass) of speaker sounds. When connecting headphones, you can adjust high-frequency range and lowfrequency range of sounds output from headphones. Choices Treble (Treble), Bass (Bass) Setting range -6.0db ~ Bypass (Bypass) ~ +6.0dB *0.5dB steps Default Bypass (Bypass) • If you set the balance extremely off, sounds may not match those from other channels well. Adjusting with the front panel controls a Press TONE/BALANCE to select "Treble" or "Bass". b Press PROGRAM to make an adjustment. ■ Adaptive DRC (Adaptive DRC) Sets whether dynamic range (from maximum to minimum) is adjusted automatically in conjunction with adjusting the volume level. When it is set to "On", it is useful for listening to playback at low volume at night. Settings On (On) Adjusts the dynamic range automatically. Off (Off) (default) Does not adjust the dynamic range automatically. If "On" is selected, the dynamic range becomes narrow at a low volume, and becomes wide at a high volume. Volume: low Volume: high On Off Input level On Off Input level ■ CINEMA DSP 3D Mode (CINEMA DSP 3D) Enables/disables CINEMA DSP 3D. If this function is set to "On", CINEMA DSP 3D functions according to the selected sound programs (except 2ch Stereo and 9ch Stereo). Settings On (On) (default) Enables CINEMA DSP 3D. Off (Off) Disables CINEMA DSP 3D. ■ Dialogue Lift (Dialog Lift) Adjusts the vertical position of center sound such as dialogues when front presence speakers are used. If dialogues are heard from a position lower than the TV screen, adjust this setting to raise the position. Setting range 0~5 (higher raises the position) Default 0 Ideal position Output level Output level En 91