Yamaha RX-A1010 Owners Manual - Page 124
Setting the remote control codes for, playback devices, TV operations
View all Yamaha RX-A1010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
SOURCE RECEIVER AV 1 2 3 5 6 7 AUDIO 1 2 3 PHONO MULTI DOCK TUNER USB [ A ] SCENE 1 2 3 4 V-AUX 4 NET [ B ] 4 PROGRAM MUTE VOLUME TOP MENU ON SCREEN POP-UP/MENU OPTION ENTER RETURN DISPLAY MODE PRESET INPUT MUTE CLASSICAL MOVIE TV TV VOL LIVE CLUB STEREO TV CH ENTERTAIN STRAIGHT PURE DIRECT SUR. DECODE ENHANCER PARTY HDMI OUT INFO MEMORY FM AM 1 2 3 TUN./ CH 4 5 6 7 8 9 SLEEP 10 0 ENT LEVEL ZONE SETUP Input selection keys 5 Use the numeric keys or cursor keys to enter the 4-digit remote control and press ENTER. Once the remote control code is set successfully, "OK" appears in the display window. If "ERROR" appears, registration failed. Repeat from step 3. 6 To exit from the setup menu, press SETUP. Cursor keys ENTER ❑ TV operations Once you have set the remote control code for your TV, you can control it using the TV operation keys regardless of an input source selected on this unit. TV operation keys INPUT MUTE TV VOL TV CH TV Switches the video inputs of the TV. Mutes the audio output of the TV. Adjust the volume of the TV. Switch the channels of the TV. Turns on/off the TV. TV operation keys ■ Setting the remote control codes for playback devices By setting the remote control codes for your playback devices, you can operate those devices with the remote control of this unit. Since the codes are assigned to each input source key, you can select the input source and device to control with the remote control concurrently. Numeric keys SETUP • At the factory, Yamaha CD player code (5095) is set for AUDIO2 and Yamaha AV receiver code (5098) is set for the other input selection keys. • If you assign the remote control code for an external device to the [A] or [B] key, you can operate the device with the remote control without switching the input source after pressing the [A] or [B] key. • When HDMI control of both this unit and playback device such as a BD/DVD player are enabled, you may be able to control the device with the remote control without registering the remote control code. 1 Use "Remote Control Code Search" in the CD-ROM to find a remote control code for your playback device. • If multiple remote control codes exist, first set the first code in the list, if it does not work then try the other codes. 2 Press SETUP. Perform each of the following steps within 30 seconds. Otherwise, the setting will be canceled. In this case, repeat from step 2. 3 Use the cursor keys ( / ) to select "PRESET" and press ENTER. PRESET 4 Press a corresponding input selection key and press ENTER. For example, press AV1 to set the remote control code for the playback device connected to the AV1 jack. Code currently registered 5098 5 Use the numeric keys or cursor keys to enter the 4-digit remote control and press ENTER. Once the remote control code is set successfully, "OK" appears in the display window. If "ERROR" appears, registration failed. Repeat from step 3. 6 To set another remote control code, repeat steps 4 and 5. En 124