2000 Lexus GS 300 Navigation Manual - Page 87
2000 Lexus GS 300 Manual
Page 87 highlights
Automatic Air Conditioning Controls SETTING OPERATION - manual control If manual air flow selection is desired - If quick heating or cooling is desired - If manual fan speed control is desired - EMV7006U EMV7007U EMV7008U The outlets from which air is delivered can be selected manually by touching the switch. The function of each mode is as follows: 1 2 3 4 Panel - Air flows mainly from the instrument panel vents. Bi-level - Air flows from both the floor vents and the instrument panel vents. Floor - Air flows mainly from the floor vents. Floor/Windshield - Air flows mainly from the floor vents and windshield vents. Type A: Push the "TEMP" or "PASSENGER TEMP" button on either side and hold it until "MAX. HOT" or "MAX. COLD" appears on the display. Type B: Push the "TEMP" or "PASSENGER TEMP" button on either side and hold it until the maximum figure or minimum figure appears. " 1 Fan speed at low high 2 Fan speed at The fan speed can be set to your desired speed by touching the appropriate air flow control switch. The higher the fan speed is, the more air is delivered. Pushing the "OFF" button turns off the fan. To remove exterior windshield frost, use the high speed setting. The selected mode is highlighted in green. The selected mode is highlighted in green. 83