2010 Suzuki Kizashi Owner's Manual - Page 122
2010 Suzuki Kizashi Manual
Page 122 highlights
BEFORE DRIVING Auto-On Headlight System EXAMPLE (5) WARNING It takes about 5 seconds for the light sensor to react to a change in lighting conditions. To help avoid an accident due to reduced visibility, turn on your headlights before driving into a tunnel, parking structure or the like. NOTE: The light sensor reacts even to infrared rays, so it may operate incorrectly when there are strong infrared rays. 57L21065 With the headlights on, push the lever forward to switch to the high beams (main beams) or pull the lever toward you to switch to the low beams. When the high beams (main beams) are on, a light on the instrument panel will come on. To momentarily activate the high beams (main beams) as a passing signal, pull the lever slightly toward you and release it when you have completed the signal. 57L21118 The Auto-on headlight system automatically turns on all lights that are operated by the lighting control lever on the steering column, when the following three conditions are all met. Conditions for Auto-on headlight system operation: 1) It is dark around the light sensor (5). 2) The lighting control lever is in the "AUTO" position. 3) You press the engine switch to change the ignition mode to "ON". This system is operated by a signal from the light sensor (5) on the front wind shield. Do not cover the sensor (5). If you do, the system will not work correctly. Reprogramming the Automatic Light Function The following settings of the automatic light function can be customized to your preference. Please contact an authorized SUZUKI dealer if you want the function reprogrammed. 2-103