2010 Suzuki Kizashi Owner's Manual - Page 71

BEFORE DRIVING EXAMPLE EXAMPLE Installation of Child Restraint with Top Strap 54G184 54G185 4) Push the child restraint toward the anchors so that the connecting bar tips are partially hooked to the anchors. Use your hands to confirm the position. 5) Grasp the front of the child restraint and push the child restraint forcefully to latch the connecting bars. Make sure they are securely latched by trying to move the child restraint system in all directions, especially forward. 6) Return the seatback if folded. Attach the top tether strap, if applicable. 57L21048 WARNING The seatback should always be securely latched in a fairly upright position when any type of child seat is installed. An unlatched or reclined seatback will reduce the intended effectiveness of the child restraint system. Some child restraint systems require the use of a top strap. Top strap anchor brackets are provided in your vehicle at the locations shown in the illustrations. Install the child restraint system as follows: 1) Secure the child restraint on the rear seat using the procedure described above for securing a restraint system that does not require a top strap. 2) Open the cover that is marked with the anchor bracket symbol to access the anchor bracket. Close the cover when not using the anchor bracket. 3) Hook the top strap to the anchor bracket and tighten the top strap according to the instructions provided by the child restraint system manufacturer. Be sure to attach the top strap to the corresponding anchor located 2-52