2010 Suzuki Kizashi Owner's Manual - Page 21

BEFORE DRIVING Immobilizer System WARNING Never leave the keyless start system remote controller in the vehicle when leaving the vehicle. The immobilizer system is an anti-theft feature, which checks whether the keyless start system remote controller that is communicating via radio waves with the vehicle has been registered to the vehicle's keyless start system. If the remote controller is not a registered one, the system will refuse to start the engine using it. NOTE: • The immobilizer/keyless start system is normal if this light goes out in 2 seconds after pressing the engine switch to change the ignition mode to "ON". If the light fails to go out in this period, there is something wrong with the system. There is also a problem with the system if the light remains on for 5 seconds after the engine switch is pressed when the switch is in any other ignition mode than "ON". • Illumination or flashing of the light may be accompanied by a message on the information display in the instrument cluster. NOTE: • If you lose your keyless start system remote controller, see your SUZUKI dealer as soon as possible to have the lost one deactivated, then have the new remote controller made by them. • If you own other vehicles with keyless start system remote controller, keep those remote controllers away from the engine switch when using your SUZUKI, or the engine may not be started because they may interfere with your SUZUKI's immobilizer system. • In case of attaching any metal objects to the keyless start system remote controller, it may not start the engine. CAUTION The keyless start system remote controller is a sensitive electronic instrument. To avoid damaging the keyless start system remote controller: • Do not expose it to impacts, moisture or high temperature such as on the dashboard under direct sunlight. • Keep the keyless start system remote controller away from magnetic objects. 1. For USA This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Immobilizer/Keyless Start System Warning Light 85K2210 This light is on the instrument cluster. • When you press the engine switch to change the ignition mode to "ON", the light comes on briefly so you can check that the light is working. If the light is flashing, the engine cannot be started. • The light also flashes when the "remote controller outside" warning works. 2-2