2010 Suzuki Kizashi Owner's Manual - Page 157

OPERATING YOUR VEHICLE How to Use the Parking Sensor Parking Sensor Switch Switch position State ON • The indicator lights up and when all necessary conditions are met, system becomes ready for operation. OFF • The system does not operate. Place the switch in this position if you do not wish to use the parking sensor. NOTE: If you push the parking sensor switch from the OFF to ON position when the ignition mode has been changed to "ON" by pressing the engine switch, the inside buzzer sounds once. Obstacle Indication by Parking Sensor (1) (2) (2) (1) (2) 57L31020 57L31021 (1) Parking sensor switch (2) Indicator • When you push the parking sensor switch with the engine switch in the "ON" mode, the switch releases to the ON position and the indicator in the switch comes on. If you then place the gearshift lever in the "R" position, the parking sensor system is activated. • Push the switch again and it stays in; this is the OFF position. The indicator in the switch goes out and the parking sensor is deactivated. (1) Obstacle detected by rear center sensors (2) Obstacle detected by rear corner sensors Upon detecting an obstacle, the parking sensor causes an interior buzzer to sound and a symbol representing the obstacle appears an the information display in the instrument cluster. • A different symbol is displayed depending on the direction and distance of the obstacle. • A buzzer located behind the rear seat sounds when a sensor at the rear detects an obstacle. 3-26