2010 Suzuki Kizashi Owner's Manual - Page 199

OTHER CONTROLS AND EQUIPMENT Selecting the reception band Press the FM/AM button (1). Each time the button is pressed, the reception band is switched as follows: Preset memory 1) Select the desired station. 2) Select the Preset button (5) to which you want to store the station and press and hold the button for 2 seconds or longer. Auto store Press and hold the AS button (6) for 2 seconds or longer. Six stations in good reception are automatically stored to the Preset buttons (5) in sequential order, starting from the lower frequencies. NOTE: • Auto store can be released by pressing AS button (6) while auto store is under way. • When the auto store is performed, the station previously stored in the memory at the position is overwritten. • When there are fewer than 6 stations that can be stored even if 1 round of auto store operation is performed, no station will be stored at the remaining Preset buttons (5). • 6 stations can be preset for FM1 and FM2 in common, and 6 stations for AM in auto store mode. Auto store mode on/off Press the AS button (6). Each time the button is pressed, the mode is switched as follows: FM1 FM2 AM AS mode on AS mode off Seek tuning Press the seek Up button (2) or the seek Down button (3). The unit stops searching for a station at a frequency where a broadcast station is available. Manual tuning Turn the TUNE FOLDER PUSH SOUND knob (4). The frequency being received is displayed. Preset station calling Press the Preset button (5). The corresponding station preset can be received. NOTE: If the button for a station not preset is pressed, the unit displays 5-20