Brother International Isodore„ Innov-ís 5000 Users Manual - English - Page 118

EDITING STITCH PATTERNS No. Display Key Name Explanation h Single/Repeat sewing Press this key to choose single stitches or continuous stitches. key Page 107 i Elongation key When 7mm satin stitch patterns are selected, press this key to choose from 5 107 automatic length settings, without changing the stitch zigzag width or stitch length settings. j Size selection key Use this key to select the size of the stitch pattern (large, small). 106 k Thread density key After selecting the stitch pattern, use this key to change the thread density of the 108 pattern. l Delete key When you make a mistake selecting a stitch pattern, use this key to delete the 100, 101 mistake. When you make a mistake in combining stitch patterns, use this key to delete stitch patterns. m Memory key Use this key to save stitch pattern combinations. 118-119 n Stitch width and stitch Shows the stitch width and stitch length of the selected stitch pattern. The 42-43 length key machine has default settings. o Thread tension key Shows the thread tension setting for the selected stitch pattern. The machine 43 has default settings. Changing the Size Select a stitch pattern, then press to change the size of the stitch pattern. The stitch pattern will be sewn in the size highlighted on the key. Memo • If you continue entering stitch patterns after changing the size, those patterns will also be sewn in that size. • You cannot change the size of combined stitch patterns once the stitch pattern is entered. Actual Stitch Pattern Size L S L S 106