Brother International Isodore„ Innov-ís 5000 Users Manual - English - Page 77

■ Overcasting Using the Side Cutter By using the side cutter, you can do overcasting while cutting the fabric. SEWING THE STITCHES CAUTION • Make sure to only select one of the stitches listed below. Using another stitch may cause the needle to hit the presser foot and break, possibly causing injury. Memo Thread the needle manually when using the side cutter, or only attach the side cutter after threading the needle using the "Automatic Threading" button. Stitch width Stitch length Stitch Stitch name Presser foot Applications [mm (inch.)] [mm (inch.)] Twin needle Auto. Manual Auto. Manual With side cutter Straight stitch while cutting 3 fabrics 0.0 0.0 - 2.5 2.5 0.2 - 5.0 (0) (0 - 3/32) (3/32) (1/64 - 3/16) NO Utility Stitches With side cutter Zigzag stitch while cutting fabrics 3.5 (1/8) 3.5 - 5.0 1.4 (1/8 - 3/16) (1/16) 0.0 - 4.0 (0 - 3/16) NO With side cutter Overcasting stitch while cutting fabrics 3.5 (1/8) 3.5 - 5.0 2.0 1.0 - 4.0 (1/8 - 3/16) (1/16) (1/16 - 3/16) NO With side cutter Overcasting stitch while cutting fabrics 5.0 3.5 - 5.0 2.5 1.0 - 4.0 (3/16) (1/8 - 3/16) (3/32) (1/16 - 3/16) NO With side cutter Overcasting stitch while cutting fabrics 5.0 3.5 - 5.0 2.5 1.0 - 4.0 (3/16) (1/8 - 3/16) (3/32) (1/16 - 3/16) NO a Follow the steps presser foot. on page 32 to remove the b Position the fork on the side cutter's operating lever onto the needle clamp screw. c Position the side cutter so that the side cutter pin is aligned with the notch in the presser foot holder, and then lower the presser foot. b ba a a Needle clamp screw b Operating lever Memo Make sure that the fork of the operating lever is set onto the needle screw firmly. a Notch in presser foot holder b Pin → The side cutter is attached. 65