Brother International Isodore„ Innov-ís 5000 Users Manual - English - Page 138

BEFORE EMBROIDERING BEFORE EMBROIDERING Embroidery Step by Step Follow the steps below to prepare the machine for embroidery. Step 9 Step 3 Step 6, 8 Step 1, 2 Step # 1 2 3 4 5 6 7 8 9 Aim Presser foot attachment Checking the needle Embroidery unit attachment Bobbin thread setup Fabric preparation Pattern selection Embroidery frame attachment Checking the layout Embroidery thread setup Step 4 Step 7 Step 5 Action Attach embroidery foot "W". Use needle 75/11 for embroidery. * Attach the embroidery unit. For the bobbin thread, wind embroidery bobbin thread and set it in place. Attach a stabilizer material to the fabric, and hoop it in the embroidery frame. Turn the main power to ON, and select an embroidery pattern. Attach the embroidery frame to the embroidery unit. Check and adjust the size and position of the embroidery. Set up embroidery thread according to the pattern. Page 127 36 128 19 138 130 143 144 25 * It is recommended that a 90/14 needle should be used when embroidering on heavy weight fabrics or stabilizing products (for example; denim, puffy foam, etc.). 126