Brother International Isodore„ Innov-ís 5000 Users Manual - English - Page 93
Mark the position and length of
View all Brother International Isodore„ Innov-ís 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
SEWING THE STITCHES One-step buttonholes are sewn from the front of the presser foot to the back, as shown below. a a a 3 Utility Stitches a Reinforcement stitching a Select a buttonhole stitch, buttonhole foot "A". and attach b Mark the position and length buttonhole on the fabric. of the a c Pull out the button holder plate on the presser foot, and insert the button that will be put through the buttonhole. Then tighten the button holder plate around the button. a Memo The maximum buttonhole length is about 28 mm (approx. 1-1/16 inches) (diameter + thickness of the button). a Button holder plate Memo The size of the buttonhole is decided by the button holder plate holding the button. 81
SEWING THE STITCHES
Utility Stitches
81
3
One-step buttonholes are sewn from the front of the presser foot to the back, as shown below.
a
Reinforcement stitching
a
Select a buttonhole stitch, and attach
buttonhole foot “A”.
b
Mark the position and length of the
buttonhole on the fabric.
c
Pull out the button holder plate on the
presser foot, and insert the button that will
be put through the buttonhole. Then tighten
the button holder plate around the button.
a
Button holder plate
a
a
a
a
Memo
The maximum buttonhole length is about
28 mm (approx. 1-1/16 inches) (diameter +
thickness of the button).
Memo
The size of the buttonhole is decided by the
button holder plate holding the button.
a