Brother International Isodore„ Innov-ís 5000 Users Manual - English - Page 38

UPPER THREADING Memo When sewing with fine, cross-wound thread, use the small spool cap, and leave a small space between the cap and the thread spool. cb h Press the "Automatic Threading" button to have the machine automatically thread the needle. a a Spool cap (small) b Thread spool (cross-wound thread) c Space e Holding the thread with your hands, slide the thread into the grooves on the thread guide plate. a a Thread guide plate f While holding the thread in your right hand, pass the thread through the thread guide in the direction indicated. → The upper threading is finished. Memo When the "Automatic Threading" button is pressed, the presser foot will be automatically lowered. Note In case the needle is not completely thread, slowly pull the loop of the thread through from the back of the needle. g When finished pulling the thread through the thread guide, cut the thread and leave the thread in position. a a Cutter 26 a a About 50mm (approx. 2 inches) Memo If the needle could not be threaded or the thread was not passed through the needle bar thread guides, perform the procedure again starting from step c.