Brother International Isodore„ Innov-ís 5000 Users Manual - English - Page 70
Flat Fell Seam
View all Brother International Isodore„ Innov-ís 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
SEWING THE STITCHES d Sew two rows of straight stitches parallel the seam line, then trim excess thread to leaving 50 mm (approx. 1-15/16 inches). Flat Fell Seam Use for reinforcing seams and finishing edges neatly. b a c a Seam line b 10 to 15 mm (approx. 3/8 inch to 9/16 inch) c About 50 mm (approx. 1-15/16 inches) e Pull the bobbin threads to obtain the desired amount of gather, then tie the threads. a Select and attach presser foot "J". b Sew the finish line, then cut allowance from the side on half of which the the seam flat fell seam will lie. * When the automatic thread cutting and automatic reinforcement stitching are preset, reinforcement stitches will be sewn automatically at the beginning of sewing. Press the "Reverse/Reinforcement Stitch" button to sew a reinforcement stitch and trim the thread automatically at the end of sewing. a b f Smooth the gathers by ironing them. a About 12 mm (approx. 1/2 inch) b Wrong side c Spread the fabric out along the finish line. g Sew on basting the seam stitch. line and remove the b a a Finish line b Wrong side d Lay both seam allowances on the side of shorter seam (cut seam) and iron them. the a a Wrong side 58