Brother International Isodore„ Innov-ís 5000 Users Manual - English - Page 89

c Attach presser foot "J". Align the center the presser foot with the middle of the of space between the fabrics and begin sewing. SEWING THE STITCHES d Place the tape over the gather, in place with basting pins. and hold it a a a Basting stitches Memo Use a thick thread. d When sewing paper away. is finished, gently tear the Tape or Elastic Attaching a Tape e Select or . Memo 3 For details on each stitch, refer to the "STITCH SETTING CHART" at the end of this manual. f Sew over the tape (or elastic). Utility Stitches a Select a straight foot "J". stitch and attach presser b Set the stitch length to 3/16 inch), and loosen 4.0 the mm (approx. upper thread tension to 2.0 (See pages 42 through 43). Memo Be sure that neither automatic reinforcement nor automatic thread cutting is selected. c Sew two rows of straight stitches on the right side of the fabric, then pull the bobbin thread to create the necessary gather. CAUTION Be sure the needle does not strike a basting pin, or any other objects, during sewing. The thread could tangle or the needle could break, causing injury. g Pull out the straight stitch threads. Memo Before sewing the straight stitch, rotate the handwheel and pull up the bobbin thread. Holding the top and bobbin thread, pull a length of thread out from the rear of the machine. (Be sure that the presser foot is raised.) 77