Brother International Isodore„ Innov-ís 5000 Users Manual - English - Page 160
Sewing Embroidery Patterns, Which Use Appliqué
View all Brother International Isodore„ Innov-ís 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
SEWING AN EMBROIDERY PATTERN ■ When Threading Manually a Thread the machine manually with the first color (see "Threading Manually" on page 27). b Lower the presser foot, then press the "Start/Stop" button to start embroidering. After 5-6 stitches, press the "Start/Stop" button again to stop the machine. c Trim the excess thread at the end of the seam. If the end of the seam is under the presser foot, raise the presser foot, then trim the excess thread. Sewing Embroidery Patterns Which Use Appliqué There are some patterns which call for an appliqué inside the pattern. When sewing an embroidery pattern with an appliqué, the color sewing order display shows "Appliqué Material", "Appliqué Position", "Appliqué", and then the sewing order of the colors around the appliqué. Memo Depending on the thread color display setting, the display may show , , or . a Attach side of an iron-on stabilizer to the appliqué material. the wrong a b Memo If there is thread left over from the beginning of sewing, it may be sewn over as you continue embroidering the pattern, making it very difficult to deal with the thread after the pattern is finished. Trim the threads at the beginning. d Press the "Start/Stop" restart the machine. button again to e Repeat steps section. c and d from the previous a Appliqué material (cotton, felt, etc.) b Iron-on stabilizer b Place the appliqué material into the embroidery frame, and then press the "Start/Stop" button to sew the outline of the appliqué. a b a Outline of appliqué b Appliqué material Memo The embroidery procedure is the same as the basic procedure explained on pages 147 through 148. → The machine will sew around the outline of the appliqué pieces and will then stop. 148