Brother International Isodore„ Innov-ís 5000 Users Manual - English - Page 140

BEFORE EMBROIDERING h Use the included screwdriver to firmly tighten the screw of the presser foot holder. a Turn the main power to OFF, the flat bed attachment. and remove CAUTION • Use the included screwdriver to firmly tighten the screw of the presser foot holder. If the screw is loose, the needle may strike the presser foot and possibly cause injury. i Press buttons. to unlock all keys and Attaching the Embroidery Unit ■ About the Embroidery Unit CAUTION • Do not move the machine with the embroidery unit attached. The embroidery unit could fall off and cause injury. • Keep your hands and foreign objects away from the embroidery carriage and frame when the machine is embroidering. Otherwise, injury may result. • If the embroidery unit could not be initialized correctly, a buzzer will sound. If this happens, go through the initialization process again. This is not a malfunction. Note • You can sew utility stitches even while the embroidery unit is attached. • Be sure to turn off the power before installing the embroidery unit. Otherwise, the machine may be damaged. • Do not touch the inner connector of the embroidery unit. The pins on the embroidery unit connection may be damaged. • Do not apply strong force to the embroidery unit carriage or pick up the unit by the carriage. Otherwise, the embroidery unit may be damaged. • Store the embroidery unit in the proper storage case. b Open the cover of the connection port. Memo Be sure to replace the cover when the embroidery unit is not installed. c Insert the embroidery unit connection into the machine connection port. Push lightly until the unit clicks into place. b ca a Embroidery unit connection b Machine connection port c Feed dog position switch Note • Be sure there is no gap between the embroi- dery unit and the sewing machine. If there is a gap, the embroidery patterns will not embroider with the correct registration. • Do not push on the carriage when installing the embroidery unit onto the machine. Moving the carriage may damage the embroidery unit. • Be sure to set the feed dog position switch to right to lower the feed dogs. 128