Brother International Isodore„ Innov-ís 5000 Users Manual - English - Page 44

CHANGING THE PRESSER FOOT CHANGING THE PRESSER FOOT CAUTION • Always press on the screen before changing the presser foot. If is not pressed and the "Start/Stop" button or another button is pressed, the machine will start and may cause injury. • Always use the correct presser foot for the selected stitch pattern. If the wrong presser foot is used, the needle may strike the presser foot and bend or break, and may cause injury. • Only use presser feet made for this machine. Using other presser feet may lead to accident or injury. Removing the Presser Foot Attaching the Presser Foot a Press the "Needle the needle. Position" button to raise a Place the new presser foot under holder, aligning the foot pin with the the notch in the holder. Lower the presser foot lever so that the presser foot pin snaps into the notch in the holder. b Press . → The key appears as . c Raise the presser foot lever. a b a Notch b Pin b Press buttons. to unlock all keys and c Raise the presser foot lever. d Press the black button on the presser holder and remove the presser foot. foot a b a Black button b Presser foot holder 32