Brother International Isodore„ Innov-ís 5000 Users Manual - English - Page 141
Removing the Embroidery Unit
View all Brother International Isodore„ Innov-ís 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
d Turn the main power to ON. → The following message will appear. e Press . BEFORE EMBROIDERING CAUTION • Always remove the embroidery frame before pressing . Otherwise, the frame may strike the embroidery foot, and possibly cause injury. • The embroidery unit will not fit in the storage case if this step is not done. b Turn the main power to OFF. → The carriage will move to the initialization position. Note • Be sure to turn the main power to OFF. Otherwise, the machine may be damaged. c Hold down the release button, and pull the embroidery unit away from the machine. Note • A confirmation message to lower the framesecuring lever after the carriage moves to its initial position. 5 a Embroidery The message will disappear after 15 seconds or press to move to the next step. ■ Removing the Embroidery Unit a Press either or , then press . → The carriage will move to the removal position. a Release button CAUTION Do not carry the embroidery unit by holding the release button compartment. 129