Brother International Isodore„ Innov-ís 5000 Users Manual - English - Page 167

MAKING EMBROIDERY ADJUSTMENTS Using the Automatic Thread Cutting Function (END COLOR TRIM) The automatic thread cutting function will cut the thread at the end of sewing each color. This function is initially turned on. To turn this function off, press key and then function can be turned on or off during embroidering. . This * This setting returns to its default when the machine is turned off. Using the Thread Trimming Function (JUMP STITCH TRIM) The thread trimming function will automatically trim any excess thread jumps within the color. This function is initially turned on. To turn this function off, press key and then . This function can be turned on or off during embroidering. * Your customized setting remains after turning off and on the machine. a Press . The automatic thread cutting function (END COLOR TRIM) will cut the thread at the end of one color sewing. This function is initially turned on. To turn this function off, press (TENSION/CUT) key and then (END COLOR TRIM). b Press a a a Jump stitch 5 Note • When this function is turned on, use the enclosed ball point needle 75/107 for embroidering patterns with short jump stitches such as alphabet characters. Using other needled may cause a thread breaking. Embroidery a Press . to turn off END COLOR TRIM. → The key will display as * When one color thread is sewn, the machine will stop without cutting the thread. 155