Brother International Isodore„ Innov-ís 5000 Users Manual - English - Page 229

ERROR MESSAGES ERROR MESSAGES If the machine is not properly set and the "Start/Stop" button or the "Reverse/Reinforcement Stitch" button is pressed, or if the operation procedure is incorrect, the machine does not start. An alarm sounds and an error message is displayed on the LCD. If an error message displays, follow the instructions in the message. Below is an explanation of 55 error messages. Refer to these when necessary (if you press the operation correctly while the error message is displayed, the message disappears). or do CAUTION • Be sure to rethread the machine. If you press the "Start/Stop" button without rethreading the machine, the thread tension may be wrong or the needle may break and cause injury. This message is displayed when the motor locks due to tangled thread or for other reasons related to thread delivery. This message is displayed if the is touched when an unusable embroidery card is inserted. This message is displayed when a button, such as the "Start/Stop" button, is pushed while the presser foot is raised. This message is displayed when the upper thread is broken or not threaded correctly, and the "Start/Stop" button or the "Reverse/ Reinforcement Stitch" button is pressed. This message is displayed when the is touched without an embroidery card inserted. This message is displayed when there is no stitch or embroidery pattern selected and the "Start/ Stop" button or the "Reverse/ Reinforcement Stitch" button is pressed. This message is displayed when the "Reverse/Reinforcement Stitch" button is pushed while the embroidery unit is attached. 8 This message is displayed when you try to combine more than 71 patterns. Appendix 217