Brother International MFC-465CN Users Manual - English - Page 52
Setting your changes as the new default, Restoring all settings to the factory settings
UPC - 012502618218
View all Brother International MFC-465CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Chapter 5 Setting your changes as the new default 5 You can save the fax settings for Fax Resolution, Contrast, Real Time TX and Scan Size you use most often by setting them the default setting. These settings will stay until you change them again. a Press (Fax). b Press a or b to choose your new setting. Press OK. Repeat this step for each setting you want to change. c After changing the last setting, press a or b to choose Set New Default. Press OK. d Press 1 to choose Yes. e Press Stop/Exit. Restoring all settings to the factory settings 5 You can restore all the settings you have changed to the factory settings. These settings will stay until you change them again. a Press (Fax). b Press a or b to choose Factory Reset. Press OK. c Press 1 to choose Yes. d Press Stop/Exit. Sending a fax manually 5 Manual transmission lets you hear the dialing, ringing and fax-receiving tones while sending a fax. a Press (Fax). b Load your document. c To listen for a dial tone press Hook or pick up the handset of an external telephone. d Dial the fax number. e When you hear the fax tone, press Black Start or Color Start. If you are using the scanner glass press 1 to send a fax. f If you picked up the handset of an external telephone, replace it. Sending a fax at the end of a conversation 5 At the end of a conversation you can send a fax to the other party before you both hang up. a Ask the other party to wait for fax tones (beeps) and then to press the Start or Send key before hanging up. b Load your document. c Press Black Start or Color Start. If you are using the scanner glass, press 1 to send a fax. d Replace the handset of the external phone. 36