Brother International MFC 7440N Users Manual - English - Page 85
Copy options (temporary settings), Enlarging or reducing the image copied, Enlarging or reducing
UPC - 012502620631
View all Brother International MFC 7440N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Making copies Copy options (temporary settings) 12 When you want to quickly change the copy settings temporarily for the next copy, use the temporary Copy keys. You can use different combinations. The machine returns to its default settings one minute after copying, unless you have set the Mode Timer to 30 seconds or less. (See Mode timer on page 20.) Enlarging or reducing the image copied 12 You can choose the following enlargement or reduction ratios: Press 100%* 97% LTRiA4 94% A4iLTR 91% Full Page 85% LTRiEXE 83% LGLiA4 78% LGLiLTR 70% A4iA5 50% Custom(25-400%) Auto 200% 141% A5iA4 104% EXEiLTR * The factory setting is shown in Bold with an asterisk. Auto sets the machine to calculate the reduction ratio that best fits the size of paper. Auto is only available when using the ADF. Custom(25-400%) allows you to enter a ratio from 25% to 400%. To enlarge or reduce the next copy follow the instructions below: a Make sure you are in Copy mode . b Load your document. c Use the dial pad to enter the number of copies (up to 99). d Press Enlarge/Reduce. e Do one of the following: Press a or b to choose the enlargement or reduction ratio you want. Press OK. Press a or b to choose Custom(25-400%). Press OK. Use the dial pad to enter an enlargement or reduction ratio from 25% to 400%. (For example, press 5 3 to enter 53%.) Press OK. f Press Start. Note Page Layout Options 2 in 1(P), 2 in 1(L), 4 in 1(P) or 4 in 1(L) are not available with 12 Enlarge/Reduce. 71