Brother International MFC 9120CN Users Manual - English - Page 198
Replacing the waste toner box, WT Box End Soon message, Replace WT Box message - reset toner counter
UPC - 012502622390
View all Brother International MFC 9120CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 198 highlights
When you replace a belt unit with a new one, you need to reset the belt unit counter by completing the following steps: C a Plug the machine's power cord back into the AC power outlet first, and reconnect all cables and telephone line cord. Turn on the machine's power switch. b (For MFC-9320CW) Press Menu, 8, 4. (For MFC-9120CN) Press Menu, 6, 4. c Press a or b to select Belt Unit. Press OK. d Press 1 to reset the belt unit counter. e Press Stop/Exit. Replacing the waste toner box C Order No. WT-200CL A new waste toner box can print approximately 50,000 A4 or Letter size single-sided pages. WT Box End Soon message C WT Box End Soon If the LCD shows WT Box End Soon, it means the waste toner box is near the end of its life. Buy a new waste toner box and have it ready before you get a Replace WT Box message. Replace WT Box message C When the following message appears on the LCD, you need to replace the waste toner box: Replace WT Box IMPORTANT DO NOT reuse the waste toner box. WARNING DO NOT put the waste toner box into a fire. It could explode. Be careful not to spill the toner. DO NOT inhale or allow it to get into your eyes. a Turn off the machine's power switch. Unplug the telephone line cord first, and then unplug the power cord from the AC power outlet. b Fully open the top cover by lifting up on the handle (1). 1 IMPORTANT When the scanner is open, you cannot open the top cover. 182