Brother International MFC 9120CN Users Manual - English - Page 59
To change the default Fax Resolution setting, Dual access (black & white only), Real Time Transmission - black line
UPC - 012502622390
View all Brother International MFC 9120CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Sending a fax To change the default Fax Resolution setting 5 a Make sure you are in Fax mode . b Press Menu, 2, 2, 2. Setup Send 2.Fax Resolution c Press a or b to choose the resolution you want. Press OK. Note You can choose four different resolution settings for black & white faxes and two for color. Black & white: Standard: Suitable for most typed documents. Fine: Good for small print and transmits a little slower than Standard resolution. S.Fine: Good for small print or artwork and transmits slower than Fine resolution. Photo: Use when the document has varying shades of gray or is a photograph. This has the slowest transmission time. Color: Standard: Suitable for most typed documents. Fine: Use when the document is a photograph. The transmission time is slower than Standard resolution. If you choose S.Fine or Photo and then use the Color Start key to send a fax, the machine will send the fax using the Fine setting. Dual access (black & white only) 5 You can dial a number, and start scanning the fax into memory-even when the machine is sending from memory, receiving faxes or printing PC data. The LCD will show the new job number. The number of pages you can scan into the memory will vary depending on the data that is printed on them. Note If you get an Out of Memory message 5 while scanning the first page of a fax, press Stop/Exit to cancel scanning. If you get an Out of Memory message while scanning a subsequent page, you can press Black Start to send the pages scanned so far, or press Stop/Exit to cancel the operation. Real Time Transmission 5 When you are sending a fax, the machine will scan the documents into the memory before sending it. Then, as soon as the telephone line is free, the machine will start dialing and sending. Sometimes, you may want to send an important document immediately, without waiting for memory transmission. You can set Real Time TX to On for all documents or Next Fax:On for the next fax only. Note • If the memory is full and you are sending a black and white fax from the ADF, the machine will send the document in real time (even if Real Time TX is set to Off). If the memory is full, faxes from the scanner glass cannot be sent until you clear some of the memory. • In Real Time Transmission, the automatic redial feature does not work when using the scanner glass. 43