Brother International MFC 9120CN Users Manual - English - Page 34
Acceptable paper and other print media, Recommended paper and print media, Type and size of paper - drivers
UPC - 012502622390
View all Brother International MFC 9120CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Chapter 2 Acceptable paper and other print media 2 Print quality may vary according to the type of paper you are using. You can use the following types of print media: thin paper, plain paper, thick paper, bond paper, recycled paper, labels or envelopes. For best results, follow the instructions below: Use paper made for plain paper copying. Use paper that is 20 to 24 lb (75 to 90 g/m2). DO NOT put different types of paper in the paper tray at the same time because it may cause paper jams or misfeeds. For proper printing, you must choose the same paper size from your software application as the paper in the tray. Avoid touching the printed surface of the paper immediately after printing. Use long grain paper with a neutral Ph value, and a moisture content of approx. 5%. Recommended paper and print media 2 To get the best print quality, we suggest using the following paper. Paper Type Plain Paper Recycled Paper Labels Envelope Item Xerox 4200DP 20 lb Hammermill Laser Print (24 lb=90 g/m2) No specific brand recommended Avery laser labels white #5160 No specific brand recommended Type and size of paper 2 The machine loads paper from the installed standard paper tray or manual feed slot. Standard paper tray 2 Since the standard paper tray is a universal type, you can use any of the paper sizes (one paper type and size at a time) listed in the table in Paper capacity of the paper trays on page 19. The standard paper tray can hold up to 250 sheets of Letter/A4, Legal or Folio size paper (20 lb or 80 g/m2). Paper can be loaded up to the maximum paper mark on the sliding paper width guide. Manual feed slot 2 The manual feed slot can hold a sheet with a size of 3 to 8.66 in. (76.2 to 220 mm) wide and 4.57 to 16 in. (116 to 406.4 mm) long. Use the manual feed slot if you are using special paper, envelopes or labels. The name for the paper trays in the printer driver in this Guide are as follows: 2 Tray and optional unit Standard paper tray Manual feed slot Name Tray Manual Feed 18