Brother International MFC 9120CN Users Manual - English - Page 204
Checking the remaining life of parts, Reset functions - belt reset
UPC - 012502622390
View all Brother International MFC 9120CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 204 highlights
Checking the remaining life of parts C You can see the machine's parts life on the LCD. a (For MFC-9320CW) Press Menu, 8, 3. (For MFC-9120CN) Press Menu, 6, 3. Machine Info. 3.Parts Life b Press a or b to choose 1.Drum, 2.Belt Unit, 3.PF Kit or 4.Fuser. Press OK. c Press Stop/Exit. Note The life check will be accurate only if you have reset the part counter when you installed a new part. It will not be accurate if that part's life counter was reset during the life of the used part. Reset functions C The following reset functions are available: 1 Network You can reset the print server back to its default factory settings such as the password and IP address information. 2 Address & Fax Address & Fax resets the following settings: Address Book (One Touch Dial/Speed Dial/Setup Groups) Programmed fax jobs in the memory (Polled TX, Delayed Fax) Station ID (name and number) Coverpage Msg (comments) Remote Fax Option (Remote Access Code, Fax Storage, Fax Forwarding, Paging and PC-Fax) Report settings (Transmission Verification Report/Tel Index List/Fax Journal) Setting Lock password 3 All Settings You can reset all the machine settings back to the settings that were set at the factory. Brother strongly recommends you perform this operation when you dispose of the machine. Note Unplug the interface cable before you choose Network or All Settings. 188