Brother International MFC 9120CN Users Manual - English - Page 37
Envelopes, Types of envelopes to avoid, with clasps, staples, snaps or tie - specifications
UPC - 012502622390
View all Brother International MFC 9120CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Loading paper and documents Envelopes 2 Most envelopes will be suitable for your machine. However, some envelopes may have feed and print-quality problems because of the way they have been made. A suitable envelope should have edges with straight, well-creased folds and the leading edge should not be thicker than two sheets of paper. The envelope should lie flat and not be of baggy or flimsy construction. You should buy quality envelopes from a supplier who understands that you will be using the envelopes in a laser machine. Envelopes can only be fed from the Manual feed slot. We recommend that you print a test envelope to make sure the print results are what you want before you print or purchase a large quantity of envelopes. Check the following: Envelopes should have a lengthwise sealing flap. The sealing flaps should be folded crisply and correctly (irregularly cut or folded envelopes may cause paper jams). Envelopes should consist of two layers of paper in the area circled in the figure below. Types of envelopes to avoid 2 IMPORTANT DO NOT use envelopes: • that are damaged, curled, wrinkled or 2 an unusual shape • that are extremely shiny or textured • with clasps, staples, snaps or tie strings • with self-adhesive closures • that are of a baggy construction • that are not sharply creased • that are embossed (have raised writing on them) • that were previously printed by a laser/LED machine • that are pre-printed on the inside • that cannot be arranged neatly when stacked • that are made of paper that weighs more than the paper weight specifications for the machine • with edges that are not straight or consistently square • with windows, holes, cut-outs or perforations • with glue on surface as shown in figure below 1 1 1 Feeding direction Envelope joints that are sealed by the manufacturer should be secure. We recommend that you do not print within 0.6 in. (15 mm) of the edges of envelopes. • with double flaps as shown in figure below 21