Brother International MFC 9120CN Users Manual - English - Page 38
Labels, Types of labels to avoid, All labels used in this machine must be able - drum
UPC - 012502622390
View all Brother International MFC 9120CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Chapter 2 • with sealing flaps that have not been folded at purchase • with sealing flaps as shown in figure below • with each side folded as shown in figure below If you use any of the types of envelopes listed above, they may damage your machine. This damage may not be covered under any Brother warranty or service agreement. Occasionally you may experience paper feed problems caused by the thickness, size and flap shape of the envelopes you are using. Labels 2 The machine will print on most types of labels designed for use with a laser machine. Labels should have an adhesive that is acrylic-based since this material is more stable at the high temperatures in the fuser unit. Adhesives should not come in contact with any part of the machine, because the label stock may stick to the drum unit or rollers and cause jams and print quality problems. No adhesive should be exposed between the labels. Labels should be arranged so that they cover the entire length and width of the sheet. Using labels with spaces may result in labels peeling off and causing serious jams or print problems. All labels used in this machine must be able to withstand a temperature of 392 degrees Fahrenheit (200 degrees centigrade) for a period of 0.1 seconds. Label sheets should not exceed the paper weight specifications described in this User's Guide. Labels exceeding this specification may not feed or print properly and may cause damage to your machine. Labels must be fed from the manual feed slot only. Types of labels to avoid 2 Do not use labels that are damaged, curled, wrinkled or an unusual shape. IMPORTANT Avoid feeding labels with the carrier sheet exposed because your machine will be damaged. 22