Brother International GT-541 Instruction Manual - English - Page 90
Checking Print Quality with Nozzle Check Pattern
View all Brother International GT-541 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
7. Troubleshooting 7-2-3. Checking Print Quality with Nozzle Check Pattern You can identify which Print Head has the problem by using the Nozzle Check Pattern. (1) Install the Platen 14 x 16 (see "4-4. Uninstalling / Installing the Platen"). (2) Set the Platen height to the "A" position (see "4-5. Placing the T-shirt on the Platen"). (3) Place a sheet of paper (A4 or letter size) at the right corner of the Platen as shown below. You can use a T-shirt instead of paper (see "4-5. Placing the T-shirt on the Platen"). Paper (4) Press the OK Button to open the Menu Display. (5) Press the Up/Down Button to select "Test Print", and then press the OK Button. (6) Press the Up/Down Button to select "Nozzle Check", and then press the OK Button. The following message appears. (7) Press the OK Button to start printing the Nozzle Check Pattern. GT-541 80