Cisco 7941G Administration Guide - Page 103

Chapter 4 Configuring Settings on the Cisco Unified IP Phone Network Configuration Menu Network Configuration Menu The Network Configuration menu provides options for viewing and making a variety of network settings. Table 4-2 describes these options and, where applicable, explains how to change them. For information about how to access the Network Configuration menu, see the "Displaying a Configuration Menu" section on page 4-2. Note The phone also has a Network Configuration menu that you access directly from the Settings menu. For information about the options on that menu, see the "Network Configuration Menu" section on page 4-40. Before you can change an option on this menu, you must unlock options as described in the "Unlocking and Locking Options" section on page 4-3. The Edit, Yes, or No softkeys for changing network configuration options display only if options are unlocked. For information about the keys you can use to edit options, see the "Editing Values" section on page 4-4. Table 4-2 Network Configuration Menu Options Option DHCP Server BOOTP Server MAC Address Host Name Description IP address of the Dynamic Host Configuration Protocol (DHCP) server from which the phone obtains its IP address. Indicates whether the phone obtains its configuration from a Bootstrap Protocol (BootP) server instead of from a DHCP server. Unique Media Access Control (MAC) address of the phone. Unique host name that the DHCP server assigned to the phone. To Change Display only-cannot configure. Display only-cannot configure. Display only-cannot configure. Display only-cannot configure. Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1 OL-14620-01 4-7