Cisco 7941G Administration Guide - Page 51

Chapter 1 An Overview of the Cisco Unified IP Phone Overview of Configuring and Installing Cisco Unified IP Phones Checklist for Installing the Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE Table 1-7 provides an overview and checklist of installation tasks for the Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE. The list presents a suggested order to guide you through the phone installation. Some tasks are optional, depending on your system and user needs. For detailed procedures and information, refer to the sources in the list. Table 1-7 Checklist for Installing the Cisco Unified IP Phone 7961G/7961G-GE/7941G/7941G-GE Step 1 Step 2 Step 3 Step 4 Task Purpose For More Information Choose the power source for the phone: • Power over Ethernet (PoE) Determines how the phone receives power. See the "Providing Power to the Cisco Unified IP Phone" section on page 2-4. • External power supply Assemble the phone, adjust Locates and installs the phone See the "Installing the phone placement, and connect in the network. Cisco Unified IP Phone" the network cable. section on page 3-7. See the "Adjusting the Placement of the Cisco Unified IP Phone" section on page 3-13. Add a Cisco Unified IP Phone Expansion Module 7914 to the Cisco Unified IP Phone 7961G/7961G-GE (optional). Extends functionality of a Cisco Unified IP Phone 7961G/7961G-GE by adding 14 line appearances or speed dial numbers. See the "Attaching the Cisco Unified IP Phone Expansion Module 7914 (SCCP Phones Only)" section on page 3-11. Monitor the phone startup process. Verifies that phone is configured properly. See the "Verifying the Phone Startup Process" section on page 3-16. Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1 OL-14620-01 1-33