Cisco 7941G Administration Guide - Page 45

Chapter 1 An Overview of the Cisco Unified IP Phone Overview of Configuring and Installing Cisco Unified IP Phones • Configuring Cisco Unified IP Phones in Cisco Unified Communications Manager, page 1-27 • Installing Cisco Unified IP Phones, page 1-32 Configuring Cisco Unified IP Phones in Cisco Unified Communications Manager To add phones to the Cisco Unified Communications Manager database, you can use: • Auto-registration • Cisco Unified Communications Manager Administration • Bulk Administration Tool (BAT) • BAT and the Tool for Auto-Registered Phones Support (TAPS) For more information about these choices, see the "Adding Phones to the Cisco Unified Communications Manager Database" section on page 2-14. For general information about configuring phones in Cisco Unified Communications Manager, refer to the "Cisco Unified IP Phone" chapter in Cisco Unified Communications Manager System Guide. Checklist for Configuring the Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE in Cisco Unified Communications Manager Table 1-6 provides an overview and checklist of configuration tasks for the Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE in Cisco Unified Communications Manager Administration. The list presents a suggested order to guide you through the phone configuration process. Some tasks are optional, depending on your system and user needs. For detailed procedures and information, refer to the sources in the list. Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1 OL-14620-01 1-27