Cisco 7941G Administration Guide - Page 134
Device > Phone > Phone Configuration, Address Resolution Protocol ARP - ge pc port not working
UPC - 746320949420
View all Cisco 7941G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
Device Configuration Menu Chapter 4 Configuring Settings on the Cisco Unified IP Phone Note The phone also has a Security Configuration menu that you access directly from the Settings menu. For information about the security options on that menu, see the "Security Configuration Menu" section on page 4-45. Table 4-12 describes the options on the Security Configuration menu. Table 4-12 Security Configuration Menu Options Option Description To Change PC Port Disabled Indicates whether the access port on the phone is enabled (Yes) or disabled (No). Must be set to enabled for video support on the phone From Cisco Unified Communications Manager Administration, Device > Phone > Phone Configuration. GARP Enabled Indicates whether the phone learns MAC addresses from Gratuitous Address Resolution Protocol (ARP) responses. Disabling the phone's ability to accept Gratuitous ARP will prevent applications that use this mechanism to monitor and record voice streams from working. If voice monitoring is not desired, set this option to No (disabled). From Cisco Unified Communications Manager Administration, Device > Phone > Phone Configuration. 4-38 Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1 OL-14620-01